Two circular pieces of card are Make a Make a Solar System Mobile used to construct each body, and they fit together to form a three-dimensional form. Before the rings are assembled, the surface characteristics of each planet must be sketched on both sides, with the goal of having all four sides match as nearly as feasible M. ake a Solar System Mobile

Collect the materials needed to construct the planets: –

Ideally, when working on this assignment Make a Solar System Mobile, you will have everything in front of you.

The following sizes of foam balls are required: 5, 4, 3, 2.5, 2, 1.5, and 1.25 inches.
Two of the 1.25- and 1.5-inch balls each are required.A 5. × 5 inch,.5-inch-thick Styrofoam sheet is also required. You will use this to create Saturn’s rings.
Acryl craft paints are available in the following colors: Colors include red, orange, yellow, green, blue-green, light blue, dark blue, cobalt blue, and black. These will be the colors you use to paint your planets.

Insert a skewer into every single foam ball: –

It will assist you in painting them. Insert the skewer about halfway through the ball rather than through all the way.

Arrange them so they are set aside as follows: Five inches, one and a quarter, one and a half, four and a third, two and a half, and three inches

Cut out Saturn’s rings: –

To accomplish this, you will need to trace circles on the Styrofoam sheet. Using the Make a Solar System Mobile rounded side of the teaspoon, smooth the edges of the rings.

Using a pencil or pen, trace the diameter of the 4-inch jar onto the center of the foam sheet.
After tracing a 4 inch ring, center the 3 inch jar inside it. With a pencil or pen, trace around the outside of the 3-inch jar.
Using an X-acto knife, cut the foam ring out by adhering to the lines you traced.
Never give a child access to a serrated knife or X-acto. This is something an adult should always do.

Give your sun and the first few planets more details: –

Paint the Styrofoam balls with the craft paint to achieve this. For a less messy craft, hold each planet by the skewer handle while creating it.
Arrange your paints in plastic cups, then rinse your paintbrush by halfway filling the cup with water.
Apply bright yellow paint to the 5-inch ball. The sun will be like this.
Grab the ball you’re adjacent to. Measuring 1.25 inches, it will symbolize Mercury. Apply orange paint on this one.
The following ball (1.5 inches) should be painted blue-green. This will stand in for Venus.
Next, paint the 1.5-inch ball a dark blue color and then add green continents. Earth will be like this.
Mars needs to be given a crimson coat. The following 1.25-inch ball will be this one.

Paint the gas giants and dowel rod: –

Neptune, Jupiter, Saturn, and Uranus are these planets.

Apply orange paint with red and white stripes on the 4-inch ball. It’s going to be Jupiter.
Use red paint to add the Great Red Spot on Jupiter at the appropriate location.
Apply orange paint to the foam ring and yellow paint on the 3-inch ball. It’s going to be Saturn.
Take the 2.5-inch ball and coat it in a pale blue paint. This will stand in for Neptune.
Coat the dowel rod in black paint.

Let the planets and dowel dry: –

They must be completely dry before you hang them from the cell phone.

Place the planets’ pointed skewer handles in a big jar and allow them to dry completely without coming into contact with one other.
While they are drying, tidy up your surroundings a little.
You can clean your paintbrush, discard your paint cups, water, and leftover paint from cutting Saturn’s rings.

Put Saturn together: –

Since Saturn has rings, it is more intricate than the other planets.

To make this mobile, line the inner rim of the orange painted ring with craft glue
Then carefully insert the three-inch yellow painted foam ball inside, being careful not to split the foam ring.
Leave it to dry while you build the other components.

Cut the string that the planets will hang from: –

The planets will hang at different levels, so you will need to cut these at different lengths. Here are some ideas:

Cut the string for the sun the shortest, about 4 inches
Cut the next string two inches longer, so the planet will hang a little bit lower; for example, if you cut the string for the sun at 4 inches, For Mercury, you would cut the string at six inches.
Continue cutting, cutting each string 2 inches longer; the planet Neptune should hang lowest on the mobile.

Attach the string to each planet: –

This is what you must do in order to hang the planets from the dowel rod.

Take the skewer out of every planet.
Fasten each string with a knot at the end.
Press each string’s knotted end into the planet’s skewer hole.
Don’t forget to attach the shortest string to the sun, the next longest string to Mercury, and so forth. Neptune has the longest string.
Give the adhesive time to dry.

In planetary sequence, fasten the opposite end of each planet’s thread to the dowel rod: –

On the left end of the dowel, the sun should be positioned first.

Maintain a healthy gap between the planets. As they hang, you don’t want them to come into contact.
Use a small amount of glue to hold the yarn or string onto the dowel.
Give it time to dry.

Suspend the mobile

Use more of the black string or yarn to hang it.

Securely fasten each end of the dowel rod with a lengthy piece of string tied with glue.
Play with the lengths on either end of the dowel while it is suspended from the strings.
After ensuring that the dowel is suspended horizontally, firmly knot the two strings that are fastened to its ends.
Tie the mobile to a ceiling hook using the strings’ leftover ends.

How to Make a Solar System Mobile